LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Auto High Beam System (Diagnostic Codes & Circuit Tests)) >> Automatic High Beam System >> DTC U0182: Lost Communication with AFS ECU [08/2013 - ] >> Procedure

DTC U0182: Lost Communication with AFS ECU [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR DTC 
    1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
    2. Check for DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .

      OK

      DTC U0182 is not output.

    NG → See step   2 

    OK → See step   3 

  2. GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] 
  3. USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ]