LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Can Communication System (Diagnostic Codes & Symptom Tests)) >> Can Communication System >> Symptom Tests >> Steering Angle Sensor Communication Stop Mode [08/2013 - ] >> Description

Steering Angle Sensor Communication Stop Mode [08/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
Detection Item Symptom Trouble Area
Steering Angle Sensor Communication Stop Mode Either condition is met:
  • "Spiral cable (Steering Angle Sensor)" is not displayed on the CAN Bus Check screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ]
  • Communication system DTCs (DTCs that start with U) that correspond to "Steering Angle Sensor Communication Stop Mode" in "DTC Combination Table" are output. Refer to DIAGNOSIS SYSTEM [08/2013 - ]
  • Steering sensor branch line or connector
  • Power source circuit of steering sensor
  • Steering sensor ground circuit
  • Steering sensor