Skid Control ECU Communication Stop Mode [08/2013 - ]: Description
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
| Detection Item |
Symptom |
Trouble Area |
| Skid Control ECU Communication Stop Mode |
Either condition is met:
- "Skid Control (ABS/VSC/TRAC)" is not displayed on the CAN Bus Check screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ]
- Communication system DTCs (DTCs that start with U) that correspond to "Skid Control ECU Communication Stop Mode" in "DTC Combination Table" are output. Refer to DIAGNOSIS SYSTEM [08/2013 - ]
|
- Brake booster with master cylinder assembly (skid control ECU) branch line or connector
- Power source circuit of brake booster with master cylinder assembly (skid control ECU)
- Brake booster with master cylinder assembly (skid control ECU) ground circuit
- Brake booster with master cylinder assembly (skid control ECU)
|