LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Can Communication System (Diagnostic Codes & Symptom Tests)) >> Can Communication System >> Circuit Tests >> Check CAN Bus Line for Short to +B [08/2013 - ] >> Description

Check CAN Bus Line for Short to +B [08/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

There may be a short circuit between one of the CAN bus lines and +B when no resistance exists between terminals 6 (CANH) and 16 (BAT) or 14 (CANL) and 16 (BAT) of the DLC3.

Symptom Trouble Area
No resistance exists between terminals 6 (CANH) and 16 (BAT) or 14 (CANL) and 16 (BAT) of DLC3.
  • Short in CAN main bus line
  • Short in CAN branch line
  • Power management control ECU
  • ECM
  • Main body ECU (Multiplex network body ECU)
  • Combination meter assembly
  • Brake booster with master cylinder assembly (Skid control ECU)
  • Steering sensor
  • Power steering ECU with motor assembly
  • Airbag sensor assembly
  • Air conditioning amplifier assembly
  • Certification ECU (Smart key ECU assembly)
  • Multi-media module receiver assembly*1*2
  • Radio receiver assembly*3
  • Clearance warning ECU assembly*4
  • CAN junction connector LH1
  • CAN junction connector RH1