DTC B2611: Telescopic Position Sensor or Telescopic Motor Circuit Malfunction [08/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

The telescopic motor is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU and slides the steering column forward and backward. The telescopic position sensor (Hall IC) in the telescopic motor detects the sliding position of the steering column in the forward and backward directions and sends a signal to the multiplex tilt and telescopic ECU based on that sliding amount.

Fig 1: Telescopic Steering Contracted Mechanical Position Graph

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Limit positions can be confirmed on the Techstream.

DTC No.	Detection Condition	Trouble Area
B2611	Telescopic operation stops within the operation range while operating.	Telescopic position sensor or telescopic motor Harness or connector Multiplex tilt and telescopic ECU