LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Power Steering System (Diagnostic Codes & Circuit Tests)) >> Power Steering System >> DTC C1541: Vehicle Speed Signal [08/2013 - ] >> Procedure

DTC C1541: Vehicle Speed Signal [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM) 
    1. Check if DTC U0129 is output. Refer to DTC CHECK / CLEAR [08/2013 - ] .

      Result

      Result Proceed to
      U0129 is not output. A
      U0129 is output. B

      HINT: 

      DTC U0129 indicates a skid control ECU (brake booster with master cylinder assembly) communication malfunction in the power steering system.

    B → See step   3 

    A: Go to next step 

  2. CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM) 
    1. Check for DTCs of the brake control system. Refer to DTC CHECK / CLEAR [08/2013 - ] .
      RESULT

      Result Proceed to
      DTCs are not output. A
      DTCs are output. B

    B → See step   4 

    A → See step   5 

  3. GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] 
  4. REPAIR CIRCUIT INDICATED BY OUTPUT CODE. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2013 - ] 
  5. REPLACE POWER STEERING ECU ASSEMBLY. Refer to  REMOVAL [08/2013 - ]