LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Cruise Control System (Diagnostics) (Introduction)) >> Cruise Control System >> DTC Check / Clear [08/2013 - ] >> DTC Check / Clear [08/2013 - ]

DTC Check / Clear [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2013 - ] .
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals