LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Audio / Video System (Service Information)) >> Window Glass Antenna Wire >> On-Vehicle Inspection [08/2013 - ] >> On-Vehicle Inspection [08/2013 - ]

On-Vehicle Inspection [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT WINDOW GLASS ANTENNA WIRE 
    1. Check for continuity of the antenna.
      Fig 1: Checking Window Glass Antenna Wire For Continuity
      GTY321754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Tester Probe
      *b Antenna Wire
      *c Tin Foil

      HINT: 

      Check for continuity at the center of each antenna wire as shown in the illustration.

      NOTE:
      • When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire. Do not use detergents or glass cleaners with abrasive ingredients.
      • When measuring resistance, wrap a piece of tin foil around the tip of the negative probe and press the foil against the wire with your finger, as shown in the illustration.

      OK

      There is continuity in the antenna.

      If the result is not as specified, repair the window glass antenna wire.