Adjustment [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE WASHER NOZZLE SUB-ASSEMBLY See step 1

ADJUST WASHER NOZZLE SUB-ASSEMBLY

Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

Fig 1: Washer Nozzle Sub-Assembly Selection

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

Washer Fluid Spray Angle

Part Number

INSTALL WASHER NOZZLE SUB-ASSEMBLY See step 1