Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT REAR SEATBACK HEATER (BENCH TYPE REAR SEATBACK COVER)
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Condition Specified Condition B-1 - A-1 Always Below 1 Ω B-1 - A-2 Always Below 1 Ω B-1 - A-3 Always 10 kΩ or higher B-1 - B-2 Always 10 kΩ or higher B-1 - B-4 Always 5.67 to 6.93 Ω B-2 - B-3 Always Below 1 Ω B-3 - A-4 Always 5.67 to 6.93 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Rear Seatback Heater (Separate Type Rear Seatback Cover))If the result is not as specified, replace the rear seatback heater (separate type rear seatback cover).
- Measure the resistance according to the value(s) in the table below.