Removal [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.

REMOVE FRONT SEAT ASSEMBLY
Refer to REMOVAL [08/2013 - ]
REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD See step 10
REMOVE FRONT POWER ADJUSTER SHIELD See step 11
REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) See step 12
REMOVE RECLINING POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) See step 13
REMOVE FRONT POWER SEAT SWITCH (w/ Seat Position Memory System) . Refer to REMOVAL [08/2013 - ] - Step 6
REMOVE FRONT LUMBAR POWER SEAT SWITCH
1. Disengage the 4 claws to remove the front lumbar power seat switch from the front power adjuster shield.
  
  Fig 1: Identifying Front Lumbar Power Seat Switch Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002