LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Hybrid Control System (Diagnostic Codes (P0A92-261 - P0C41-627))) >> Hybrid Control System >> DTC P0A94-587: DC / DC Converter Performance [08/2013 - ] >> Description

DTC P0A94-587: DC / DC Converter Performance [08/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

For a description of the boost converter. Refer to DESCRIPTION .

The MG ECU uses a voltage sensor (VL) that is built into the boost converter to detect the high voltage before it is boosted. The ECU also uses the battery smart unit to detect HV battery voltage (VB).

HINT: 

Using the Techstream, check the Data List of "Power Resource VB" and "Batt Pack Current Val". If these values are not within the below range, there is a battery smart unit malfunction.

Fig 1: Identifying DC / DC Converter Performance Chart
GTY317666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DTC No. INF Code DTC Detection Condition Trouble Area
P0A94 587 Voltages from HV battery voltage (VB) sensor and boost converter voltage (VL) sensor deviate
  • Inverter with converter assembly
  • Battery smart unit