LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Hybrid Control System (Diagnostic Codes (P0069-273 - P0A75-336))) >> Hybrid Control System >> DTC P0069-273: Manifold Absolute Pressure - Barometric Pressure Correlation [08/2013 - ] >> Description

DTC P0069-273: Manifold Absolute Pressure - Barometric Pressure Correlation [08/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

The atmospheric pressure sensor mounted on the MG ECU circuit board detects the atmospheric pressure. This reading is used to perform system control that considers vehicle usage conditions.

Fig 1: Manifold Absolute Pressure & Barometric Pressure Correlation System Diagram
GTY314802Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DTC No. INF Code DTC Detection Condition Trouble Area
P0069 273 Difference between the atmospheric pressure value of the atmospheric pressure sensor in the inverter with converter assembly and the manifold absolute pressure sensor (for EGR control) exceeds a specified value. The same condition recurs within 3 hours when driving in EV drive mode.
  • Inverter with converter assembly
  • Manifold absolute pressure sensor
  • ECM
  • Wire harness or connector