LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Hybrid Control System (Diagnostic Codes (P0C73-776 - U0424-537) & Circuit Tests))) >> Hybrid Control System >> DTC P314A-828: Inverter Coolant Pump Speed Signal [08/2013 - ] >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If DTC P0A78-284, 286, P0A7A-322, 324, P0A94-553 or 557 is output, replace the inverter with converter assembly after this inspection.

HINT: 

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

  1. Turn the power switch on (READY) and wait for 2 minutes or more.
scientia non olet · About LEMON Manuals