LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Hybrid Control System (Diagnostic Codes (P0C73-776 - U0424-537) & Circuit Tests))) >> Hybrid Control System >> DTC P314A-828: Inverter Coolant Pump Speed Signal [08/2013 - ] >> Description

DTC P314A-828: Inverter Coolant Pump Speed Signal [08/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the description for DTC P0C73-776. Refer to DESCRIPTION .

DTC No. INF Code DTC Detection Condition Trouble Area
P314A 828 The inverter water pump speed signal is not sent to the power management control ECU when the power switch is turned on (READY).*1
(1 trip detection logic)
  • Wire harness or connector
  • Power management control ECU
  • Inverter water pump assembly
  • INV W/PMP fuse
  • INV W/PMP RLY fuse
  • INV W/PMP relay
RELATED DATA LIST

DTC No. Data List Item
P314A-828
  • Inverter W/P Revolution
  • W/P Run Control Duty*2
  • Ready Signal

*2: This Data List item is related to the inverter water pump assembly.

RELATED ACTIVE TEST

DTC No. Active Test
P314A-828 Activate the Water Pump*3

*3: This Active Test item is related to the inverter water pump assembly.