LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Hybrid Control System (Diagnostic Codes (P0C73-776 - U0424-537) & Circuit Tests))) >> Hybrid Control System >> DTC P3147-240: Transmission system; DTC P3147-242: Transmission system [08/2013 - ] >> Procedure

DTC P3147-240: Transmission system; DTC P3147-242: Transmission system [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (HYBRID CONTROL) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
    4. Check for DTCs.

      Result

      Result Proceed to
      P3147-240 or P3147-242 only is output. A
      P0A1D is also output. B
    5. Turn the power switch off.

    B → See step   3 

    A → See step   2 

  2. REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY. Refer to  COMPONENTS [08/2013 - ] 
  3. GO TO DTC CHART (P0A1D). Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2013 - ]