DTC P1606-308: Collision has been detected or Collision Sensor Connection (Open); DTC P1606-317: Collision has been detected or Collision Sensor Connection (Open) [08/2013 - ]: Description
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
The power management control ECU receives a signal that indicates a collision from the airbag sensor assembly to detect a collision. After detecting a collision, the power management control ECU shuts off the high voltage systems for safety.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P1606 | 308 | Shutoff signal from the airbag sensor assembly is determined. |
|
| 317 | A collision is determined due to a wiring malfunction. |
|
HINT:
If P1606-308 or 317 is output, the vehicle cannot start unless the DTCs are cleared using the Techstream.