Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT QUICK HEATER ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition H31-1 (B)- Ground terminal Always Below 1 Ω H31-2 (B)- Ground terminal Always Below 1 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Quick Heater Assembly)- If the result is not as specified, replace the quick heater assembly.
- Measure the resistance according to the value(s) in the table below.