LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A4 Prestige >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA, DKUA] >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjustment Valve 1 -N205- / Exhaust Camshaft Adjustment Valve 1 -N318-, Removing And Installing >> Installing

Camshaft Adjustment Valve 1 -N205- / Exhaust Camshaft Adjustment Valve 1 -N318-, Removing And Installing: Installing

Install in reverse order of removal and note the following:

NOTE:

Replace the seals and O-rings after removal.

-- Oil the O-rings on the sealing surface to the valve for the camshaft adjustment with engine oil.

Additional procedures depending on the model. Refer to CAMSHAFT ADJUSTMENT VALVE 1 -N205-, REMOVING AND INSTALLING .