Overview - Differential

Fig 1: Exploded View Of Differential

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Left Flange Shaft Seal
- Replacing. Refer to SEALS .
Shim
- Behind the taper roller bearing outer race
Taper Roller Bearing Outer Race
Front Differential
Bolt
- Tightening specification and sequence: DIFFERENTIAL .
- Always replace after removing
Circlip
- Always replace
Right Flange Shaft
- Removing and installing. Refer to DIFFERENTIAL .
Right Flange Shaft Seal
- Replacing. Refer to SEALS .
Final Drive Cover
- Removing and installing. Refer to SEALS .
O-ring
- Always replace after removing
Shim
- Behind the taper roller bearing outer race
Taper Roller Bearing Outer Race
Left Flange Shaft
- Removing and installing. Refer to DIFFERENTIAL .
Bolt
- 10 Nm + 90°
- Always replace after removing
- Quantity: 3
Gear Carrier
- Attached to the left flange shaft with the bearing -16- and the circlip -17-
Bearings
- For the left flange shaft
Circlip
- For the left flange shaft bearing