LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A4 Premium Plus >> Repair and Diagnosis >> Transmission >> Clutch [7-Speed Dual Clutch Transmission 0CJ, 0CK, 0CL, 0DN, 0DP] >> 30 Clutch >> Clutch >> Input Shaft Seal, Replacing >> Removing

Input Shaft Seal, Replacing: Removing

CAUTION:

There is a risk of damaging the clutch from mishandling.

  • The shaft seal can only be replaced when the clutch is installed. Refer to REMOVING 

-- Pry out the shaft seal -arrow- carefully with the :T20143  .

GWWA30-10333Courtesy of AUDI OF AMERICA, LLC
NOTE:

Do not damage the contact surface on the shaft.

scientia non olet · About LEMON Manuals