Overview - Engine Oil Cooler
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Sub-Assembly Bracket
- There are different versions. Refer to the appropriate service information for the allocation.
- Removing and installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
- Seal
- Always replace after removing.
- O-Rings
- Always replace after removing.
- Coat with engine oil
- Mechanical Switch Valve
- Replacing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
- Engine Oil Cooler
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
- See note. Refer to OVERVIEW - OIL PAN/OIL PUMP, VERSION 1 .
- Seal
- Always replace after removing.
- Coat with coolant
- Connection
- Bolt
- 8 Nm + 45°
- Always replace after removing.