LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lubrication [CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA, DDWA, DJYA, DKWA, DNTA, DKNA, DLHA, DLHB, DMFA, DKWB, DLGA]) >> 17 Lubrication >> Engine Oil Cooler >> Mechanical Switch Valve, Removing And Installing >> Installing

Mechanical Switch Valve, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following: 

-- Coat the mechanical switch valve O-rings with engine oil and install the switch valve.

-- Install the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals