Brake Caliper, Removing And Installing, 1LA/1LB: Installing

Clean Bolts Before Reusing.

Replace the damaged bolts. Refer to the Parts Information.

-- Carefully press the brake caliper with the brake carrier and the installed brake pads over the brake rotor.

-- Tighten the brake carrier with bolts -5-.

Fig 1: Exploded View Of BRAKE System 1LT & 1LY

Courtesy of AUDI OF AMERICA, LLC

-- Place the brake hose in the bracket.

-- Install the wheels.

Wheel bolt tightening specification. Refer to WHEEL, CHANGING AND MOUNTING / WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower the vehicle.