Cam Adjustment Actuator, Removing And Installing: Installing

Install in reverse order of removal and note the following:

• Check the O-rings for damage

• The cam adjustment actuator pin must be brought into the installation position. 
  Fig 1: Bring the Cam Adjustment Actuators into the Installed Position

  Courtesy of AUDI OF AMERICA, LLC

-- Press down the cam adjustment actuator pin in direction of -arrow- by hand.

• The adjusting element pin must not be in the outward position.

-- Coat the O-rings with engine oil.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .