Special Tools

Special tools and workshop equipment required 

• Crank Shaft Seal Installer - Guide Piece: T10122/6A  from Seal Installer - Crankshaft: T10122B 
  Fig 1: Assembly Device

  Courtesy of AUDI OF AMERICA, LLC
• Guide Piece to Crankshaft Seal Install Kit - Guide Piece: T10122/1  from Seal Installer - Crankshaft: T10122B 
• Locking Pin: T10060A 
  Fig 2: Identifying Locking Pin

  Courtesy of AUDI OF AMERICA, LLC
• Counterhold - Vibration Damper: T10355 
  Fig 3: Counterhold - Vibration Damper T10355

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer, Intermediate Shaft: T10356/1 
  Fig 4: Identifying Seal Installer

  Courtesy of AUDI OF AMERICA, LLC
• Piston Installation Tool: T40347 
• Vibration Damper Assembly Tool: T10531 
  Fig 5: Assembly Tool Set T10531

  Courtesy of AUDI OF AMERICA, LLC
• Vibration Damper Assembly Tool - Counterhold Tool: T10531/1 
• Vibration Damper Assembly Tool - Tensioning Pins: T10531/2 
• Vibration Damper Assembly Tool - Turning Over Tool: T10531/3 
• Vibration Damper Assembly Tool - Knurled Nut: T10531/4 
• Torx Bit - T40: T10545 

  Courtesy of AUDI OF AMERICA, LLC

• Seal Installer - Sealing Flange Guide Sleeve: T20097 
  Fig 6: Identifying Sealing Flange Guide Sleeve

  Courtesy of AUDI OF AMERICA, LLC
• Wrench - 21mm: T40263 
  Fig 7: Identifying Wrench - 21mm

  Courtesy of AUDI OF AMERICA, LLC
• Adapter: T40314 
  Fig 8: Adapter T40314

  Courtesy of AUDI OF AMERICA, LLC
• Funnel: T40347 
  Fig 9: Funnel : T40347

  Courtesy of AUDI OF AMERICA, LLC
• Internal Puller: VAS251605  (was Kukko 21/2)

  Courtesy of AUDI OF AMERICA, LLC

• Counter Support: VAS251621  (was Kukko 22/1)
  Fig 10: Counter Support

  Courtesy of AUDI OF AMERICA, LLC
• Cylinder Dial Bore Gauge: VAS6078 
• Dial Gauge - 0-10mm: VAS6079 
  Fig 11: Dial Gauge

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge - 0-10mm: VAS6079 
  Fig 12: Dial Gauge

  Courtesy of AUDI OF AMERICA, LLC
• Bearing Installer - Bearing Press Piece: VW207C 
  Fig 13: Identifying Bearing Installer

  Courtesy of AUDI OF AMERICA, LLC
• Pilot Drift: VW222A 
  Fig 14: Identifying Pilot Drift

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge Holder: VW387 
  Fig 15: Dial Gauge Holder

  Courtesy of AUDI OF AMERICA, LLC
• Flywheel Retainer: 3067 
  Fig 16: Identifying Pin Type Wrench

  Courtesy of AUDI OF AMERICA, LLC