SUBFRAME, Securing: Removing
Removal is performed in the reverse order. Note the following:
-- Always only remove one locating pin and replace it with a new bolt.
CAUTION:
There is a risk of damaging the threads on the subframe threaded connection to the body.
- The subframe bolts on the body must not be loosened or tightened with an impact wrench.
- Always install all bolts by hand for the first few turns.
-- A road test must be performed after completing repairs. If steering wheel is crooked, the wheels must be aligned. Refer to VEHICLE ALIGNMENT .
Tightening Specifications
- Refer to OVERVIEW - SUBFRAME
- Refer to OVERVIEW - NOISE INSULATION .
- Diagonal braces. Refer to OVERVIEW - UNDERBODY TRIM PANELS .