Engine, Transmission, Final Drive And Steering, Checking For Leaks And Damage

Removal Procedures: 

-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

Procedure: 

-- Check the engine and its attachments from below for leaks and damage.

-- Check the belt drive in the visible area for damage.

-- Check the radiator and coolant circuit for leaks and damage.

-- Check the refrigerant circuit consisting of the A/C compressor, condenser and refrigerant lines, including the connections, for damage.

-- Check the transmission, final drive and steering for leaks and damage.

-- If there are defects, repair or replace the respective component.