Door Hinges With Separated Arrester, Cleaning And Lubricating
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Universal Oil Spray: G 000 115 A2 for door arrester and door hinges
Requirements:
- Vehicle must be at least at room temperature.
Procedure:
-- First clean the lubricated areas with a lint-free cloth.
-- Lubricate the upper and lower door hinge at the marked locations -arrows- and the separate arrester -arrows- with Universal Oil Spray: G 000 115 A2 .
Door Hinge:
Door Arrester:
-- Move the door multiple times, to allow the universal oil spray to seep in.
-- Remove the excess lubricant from all door hinges with a cloth.
-- Repeat the cleaning and lubricating procedure on all vehicle doors.