Brake System, Checking Brake Hose Condition And Presence Of Bleed Screw Protective Caps

Requirements:

• When at the maximum steering angle, the brake hoses must not touch other vehicle components.
• The brake hoses must not be twisted.

Procedure: 

-- Make sure all brake hoses are attached properly and observe the specified requirements.

-- Check all brake hoses for chafing, porosity, bubbles and cracks.

-- Make sure the brake hose connections are seated correctly and check for corrosion and leaks.

-- If a defect is located on the brake hoses, repair or replace the affected component.

-- Check on all brake calipers if the bleed screw protective caps are present and attached.

-- Replace any missing protective caps.