Wheel Bearing Unit, Removing And Installing, Fwd Vehicles: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Puller - Grease Cap: VW637/2
- Camshaft Installer Kit - Sleeve: 3241/4
- Torque Wrench 1332 40-200Nm: VAG1332
- Torque Wrench 1410: VAG1410
- Socket - Xzn 18mm: T10162A
WARNING:
There is a risk of breaking the with the tool number : T10162 without the "A" index.
- : T10162A must be used exclusively.