Spring, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the wheel. Refer to WHEELS AND TIRES .
-- Press the tabs -arrows- on the assembly aid -1- inward.
-- Remove the assembly aid -1- upward.
-- Insert the spring tensioner -3-.
- : VAG1752/3A
- : VAG1752/9
- : VAG1752/1
- Spring
WARNING:
Make sure the coil spring is seated correctly in the : VAG1752/3A -arrow- (danger of accident).
-- Compress coil spring until it can be removed.
NOTE:
Use a wrench or a reversible ratchet to tighten the spring compressor.
-- Remove the spring.