Overview - Stabilizer Bar
WARNING: This page is about a different variant/trim than selected.
- Stabilizer Bar
- With rubber bushings
- Removing and installing. Refer to STABILIZER BAR, REMOVING AND INSTALLING .
- Coupling Rod
- Removing and installing. Refer to COUPLING ROD, REMOVING AND INSTALLING .
- Lower Transverse Link
- Nut
- 20 Nm +180°
- Replace after removing
- Bolt
- Replace after removing
- Bolt
- 20 Nm +90°
- Replace after removing
- Install evenly
- Nut
- 55 Nm
- Counterhold at connecting link socket head when tightening
- Subframe