LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 75 (Front Suspension [Coupe]) >> 40 Front Suspension >> SUBFRAME >> Coupling Rod, Removing And Installing >> Installing

Coupling Rod, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

-- Tighten the nuts -arrows- for securing the coupling rod on the stabilizer bar or tighten the stabilizer bar. Counterhold with a multi-point socket on the threaded pins -2- to do this.

NOTE:

The counterhold tool must not be tilted.

scientia non olet · About LEMON Manuals