LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information) [Coupe]) >> 44 Wheels, Tires And Wheel Alignment >> Tire Wear >> Permitted Differences In Tread Depth >> Models With Vertically Installed Engine

Models With Vertically Installed Engine

WARNING: This page is about a different variant/trim than selected.

Tread depth difference on models with vertically installed engine, such as A4, A5, A6, A7, A8, Q5, Q7...

Here the average difference between the front and rear axle must not be greater than 2 mm.

Average at front axle 3.0 mm

Average at rear axle 4.5 mm

Difference of front axle to rear axle 1.5 mm

Within the permissible tolerance of 2 mm

scientia non olet · About LEMON Manuals