LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 73 (Glass, Window Regulators [Coupe]) >> 64 Glass, Window Regulators >> Side Windows >> Rear Side Window, Removing And Installing >> Damaged Rear Side Window, Removing

Damaged Rear Side Window, Removing

WARNING: This page is about a different variant/trim than selected.
CAUTION:

Risk of injury to the hands and eyes from glass fragments.

Getting cut is possible.

- Wear protective eyewear.

- Wear safety gloves.

-- Protect the body and vehicle interior from glass splinters.

-- Tape off the flange all the way around with fabric-reinforced adhesive tape.

-- Removing the roof trim molding. Refer to TRIM MOLDING, REMOVING AND INSTALLING, ROOF .

-- Remove the left and right C-pillar trim panel. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the left and right side trim panel. Refer to SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the glass pieces up to the adhesive.

-- Cut through the adhesive (with glass remnants) in the opening for the window using a :VAG1561A  and :VAG1561/10  (with stopper roll).