Minimum Curing Times For Bonded Windows
WARNING: This page is about a different variant/trim than selected.
- For safety reasons, use only non-conductive two-part adhesive when installing windshield and rear window with the materials listed below.
- The vehicle can only be used after the minimum curing time has elapsed.
- During the minimum curing time, the vehicle must be resting at room temperature (at least 15 °C) on a level surface.
| Window type | Adhesive | Minimum curing time in hours |
|---|---|---|
| Windshield | Two-Part Window Adhesive Kit:D 004 660 M2 | 2 |
| Rear Window | Two-Part Window Adhesive Kit:D 004 660 M2 | 2 |
| Side Windows | One-Part Window Adhesive:D 169 300 M1 | 6 |