LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Hood, Lids [Coupe]) >> 55 Hood, Lids >> Rear Lid >> Striker, Removing And Installing >> Removing

Striker, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the nuts -1- and -3- and remove the striker -2-.

Fig 1: Identifying Combination Nuts -1- And -3-, Striker Pin -2-
GWWA55-10449Courtesy of AUDI OF AMERICA, LLC