Engine Compartment Lid, Removing And Installing, Coupe: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the grip piece. Refer to the appropriate service information .
-- Disconnect the connectors and the antenna wires and free up the wiring harness.
-- Remove the grommet and guide the left and right wiring harnesses out of the body opening.
-- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
-- Remove the bolts -1 and 3-.
-- Remove the rear lid -2-.