Overview - Engine Compartment Lid, Coupe
WARNING: This page is about a different variant/trim than selected.
- Overview - Rear Lid Attachments. Refer to OVERVIEW - REAR LID ATTACHMENTS .
- Cable
- For the emergency release
- Removing and Installing. Refer to EMERGENCY RELEASE CABLE, REMOVING AND INSTALLING, COUPE .
- Clip
- For the emergency release cable
- Rear Lid
- Removing and Installing. Refer to ENGINE COMPARTMENT LID, REMOVING AND INSTALLING, COUPE .
- Adjusting. Refer to REAR LID, ADJUSTING .
- Gas-Filled Strut
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
- Hinge
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Bolt
- 21 Nm
- Quantity: 2
- Nut
- 21 Nm
- Quantity: 2
- Ball Pin
- 21 Nm
- Quantity: 2
- Grip Piece
- With integrated license plate lamp
- Removing and Installing. Refer to the appropriate service information .
- Latch
- Removing and Installing. Refer to LATCH, REMOVING AND INSTALLING, COUPE .
- Nut
- 23 Nm
- Quantity: 2
- Striker
- Removing and Installing. Refer to STRIKER, REMOVING AND INSTALLING .
- Nut
- 21 Nm
- Quantity: 2