LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Hood, Lids [Coupe]) >> 55 Hood, Lids >> Rear Lid >> Hinge Cover, Removing And Installing >> Removing

Hinge Cover, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Open the engine compartment lid.

-- Remove the clip -2-.

GWWA55-11078Courtesy of AUDI OF AMERICA, LLC

-- Pull the roof frame cover -4- slightly upward until the tab -3- and the guide -5- are pulled out of the hinge cover -1-.

-- Remove the hinge cover from the catches -6- and remove.