LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Hood, Lids [Coupe]) >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer, Removing And Installing >> Installing

Adjusting Buffer, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

-- Check the seal -2- between the adjusting buffer and body for damage.

-- Adjust the adjusting buffer. Refer to REAR LID, ADJUSTING .

scientia non olet · About LEMON Manuals