LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Hood, Lids [Coupe]) >> 55 Hood, Lids >> Hood >> Hood, Adjusting >> Adjustment Dimensions

Adjustment Dimensions

WARNING: This page is about a different variant/trim than selected.
GWWA55-11116Courtesy of AUDI OF AMERICA, LLC
  1. A - Hood to A-Pillar
    • Gap dimension = 3.8 mm
  2. B - Hood to Door
    • Gap dimension = 3.5 mm
  3. C - Hood to Fender
    • Gap dimension = 3.5 mm
  4. D - Hood to Bumper/Headlamp
    • Gap dimension = 5.0 mm
  5. E - Hood to Radiator Grille
    • Gap dimension = 6.0 mm
scientia non olet · About LEMON Manuals