Sill Panel, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Free up the sill panel in the area of the door seal.
-- Unclip the front of the sill panel strip -1- using the : T10383 beginning from the side sill in direction of -arrows-.
-- Release the tabs -2- and the sill panel clip -3- with the : T10383/1 in direction of -arrow A-.
NOTE:
The sill panel for the TT Coupe is illustrated.
-- Remove the sill panel -1- forward from the side trim panel in direction of -arrow B-.
-- Remove the sill panel.