LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Interior Trim [Coupe]) >> 70 Interior Trim >> Luggage Compartment Trim Panels >> Rear Luggage Compartment Floor Handle, Removing And Installing >> Installing

Rear Luggage Compartment Floor Handle, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Positioning Mounting Bracket
GWWA70-12009Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

-- Position the mounting bracket -arrow- from below in the cut-out in the luggage compartment floor and hold.

-- Push the luggage compartment floor panel handle opposite the direction of travel in the frame in direction of -arrow 1- and lock downward in direction of -arrow 2-.

Fig 2: Installing Luggage Compartment Handle
GWWA70-12010Courtesy of AUDI OF AMERICA, LLC