Digital Compass, Calibrating
WARNING: This page is about a different variant/trim than selected.
It is necessary to set RHD or LHD when:
- A new Automatic Dimming Interior Rearview Mirror -Y7- is installed.
-- Press the button -2- for 12 to 15 seconds until either an "L" (for LHD vehicles) or an "A" (for RHD vehicles) appears.
-- Press the button again briefly to change the steering side.
-- After a brief moment, the display changes automatically to "C" - for calibrating. The digital compass must now be calibrated again. Refer to DIGITAL COMPASS, CALIBRATING .
-- The interior rearview mirror automatic dimming function is reactivated after setting the steering side. Refer to AUTOMATIC DIMMING FUNCTION, SWITCHING ON AND OFF .