Compass Zone, Adjusting
WARNING: This page is about a different variant/trim than selected.
It is Necessary to Set the Compass Zone if:
- A new Automatic Dimming Interior Rearview Mirror -Y7- is installed.
- If the vehicle is driven a long distance over more than two zones from the originally set zone, then the new compass zone must be set again.
Compass Zone, Adjusting:
-- Press the button -2- for 6 to 9 seconds until a "Z" and a magnetic zone number appear.
-- Keep pressing the button until the number of the desired compass zone appears.
-- Read the desired compass zone on the world map:
- North America. Refer to North America .
After a few seconds, the compass display switches from the zone number of the desired compass zone to the direction.
-- The interior rearview mirror automatic dimming function is reactivated after the compass zone is set. Refer to COMPASS DISPLAY, SWITCHING ON AND OFF .