Brake Carrier, Removing And Installing, Rear Brakes: Installing
WARNING: This page is about a different variant/trim than selected.
NOTE:
Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.
Install in reverse order of removal and note the following:
WARNING:
Health Risk.
- Do not blow out brake system with compressed air.
NOTE:
Use only mineral spirits to clean the brake carrier.
-- Install the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING, REAR BRAKES .
WARNING:
Risk of accident!
- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly seat in their respective position.
- Make sure the brakes are working correctly before driving the vehicle for the first time.