Brake Pads, Removing And Installing, TTRS And Ceramic Brakes: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Piston Resetting Tool :T10145
- Commercial type punch pin
- Lithium Grease :G 052 150 A2 . Refer to the Parts Information.
CAUTION:
If brake pads are ceramics, wheel must not fall on brake rotor, otherwise it will be irreparably damaged. To install/remove wheel, install two assembly pins from vehicle tool kit in mounts on wheel bolts. The long assembly pin is in the upper position.