LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 63 (Mechanical Components (Brake System) [Coupe]) >> 46 Mechanical Components >> Front Brakes 1LK/1LH TTS >> Brake Rotor, Removing And Installing, 1LK/1LH TTS >> Removing

Brake Rotor, Removing And Installing, 1LK/1LH TTS: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the affected brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, 1LK/1LH TTS .

Fig 1: Identifying Bolt And Brake Rotor
GWWA46-10405Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the brake rotor.

CAUTION:

Risk of damaging the brake rotors.

  • Do not separate the brake rotors from the wheel hub by force. If required, use rust remover.
scientia non olet · About LEMON Manuals